|
View Enquiry Basket
Fabricated Products
| We have the advanced manufacturing facility equipped with latest machines. Our advanced machines facilitate us in fabricating technologically advanced fabricated products. Our technicians are ready to accept the new challenges and they manufacture these fabricated products as per the sample drawings provided by clients. Our wide gamut of fabricated products includes pressure vessel, storage tanks, heat exchangers, industrial reactors, steel agitators, cement mixer, industrial furnace and industrial reducer. |
Pressure Vessel
A pressure vessel is a device mounted on a hot water heater or boiler. These pressure vessel are specifically designed to release high steam pressure in the tank and thus prevent tank explosions. Equipped with specialty valves, our finished pressure valves are used in a variety of pneumatic, hydraulic and cryogenic applications to provide protection from over-pressure in steam, gas, air and liquid lines.
The self-operating pressure vessel are installed to prevent over pressurization of the system. The valves facilitates letting off the steam when safe pressure level is exceeded. Moreover the valves get closed when the pressure level drops to the preset level.
Application Area:- Petrochemicals
- Pneumatic equipments
- Hydrocarbons
- Chemical Processing
Add to Enquiry Basket | 
|
Storage Tanks
We offer wide range of storage tanks which have domestic as well as industrial usage. They are available in different shapes viz. elliptical, dished, flat or conical head as per the requirements of clients.
Specifications:- Material: stainless steel, 304, 321, 316l. / cladding plate of austenitic stainless steel
- Temperature: -70 - 350oc
- Pressure: -0.1 - 9.9mpa
- Max. Volume: 100M3
- Equipped with inside coil, outside coil, jacket or U tube
Add to Enquiry Basket | 
|
Heat Exchangers
Our finished heat exchangers are suitable for carbon steel and low alloy steel heat exchanger and condenser in petroleum, chemical and other industries. These heat exchangers are manufactured from qualitative raw material and can withstand extreme temperature and pressure.
Applications:- Oil field
- Medicine factory
- Refinery
Add to Enquiry Basket | 
|
Industrial Reactors
We manufacture industrial reactors for industrial use from premium grade stainless steel (304, 321, 316L) and cladding plates. These seal type industrial reactors can be mechanical, magnetic or packing as per the specifications of clients.- Temperature: -40 to 350 0C
- Pressure: -0.1 to 9.9mPa
- Maximum volume: 100m3
- Frames: Single support or double-support frame
Add to Enquiry Basket | 
|
Steel Agitators
Our finished steel agitators are available in metallic & many coated material which makes them resistant to corrosion. These steel agitators are robust in construction and equipped with various types of impellers based on the application. We design these steel agitators to withstand wide range of pressure & temperature including full vacuum to very high pressure.
Specifications:- Raw material used: SS, high alloy steel, titanium, Ni¿alloys, rubber
- Low power consumption
- Easy to install and cost effective both in initial & operating stage
- Entry: Top, Side or bottom as per requirement
- Shafts: Solid/Hollow with entry top, side or bottom
- Suitable for light to heavy duty applications involving large motors
- Equipped with stuffing box, jacketed stuffing box, mechanical seals, With bottom support bearings
As per the specifications of clients, we supply agitators with:- Shaft with single or multiple impellers and as per design the components like stuffing box/mechanical seal, bearing housing, gearbox stand & involved couplings
- 2 Gear box, motor, drive & driven end couplings/belt etc.
Advantages:- Facilitates excellent process results
- Reduced power consumption
- Low energy cost
- Waste minimization
Add to Enquiry Basket | 
|
Cement Mixer
Our range of cement mixer is used in asbestos industry for mixing sand, cement, fiber and water for further asbestos sheet manufacturing. These cement mixer are very useful in manufacturing processes due to its durability & resistant power.
Add to Enquiry Basket | 
|
Industrial Furnace
We offer a wide range of industrial furnace to our clients, as per requirement. We offer two type of industrial furnace :- cupola furness, induction furness.
Molding Process :- Sand Mold, Green Sand Mold, Silicate Sand Mold
Casting Capacity :- 0.1 Kg. to 1500 Kg. / Piece & 1500 MT/Year
Extra Facitlity :-- Sort Blasting Finishing
- Casting With redoxide
- Grinding of fines & Parting line
- Machining facility if necessary
Add to Enquiry Basket | 
|
Industrial Reducer
We offer a huge variety of industrial reducer. Our range of industrial reducer are customized as per customer requirements.
Types of Industrial Reducer: Industrial reducer are basicaaly of two types:Concentric Reducer:- Concentric reducers are used to properly reduce into and out of circulating pumps.
- The concentric reducer pipe fitting also allows both the inlet and outlet ends to align to a common center line.
- Some of the important parameters used to select a concentric reducer are pressure/vacuum, max temp compression, approximate force, elongation etc.
- They are manufactured in various alloys, schedules, sizes and flange configurations. Concentric reducers frequently trap air when used at the suction of the pump.
- Concentric reducer save installation space and reduce costs.
- Piping systems must be anchored when using concentric reducer.
Applications:Some of the industries where they find application are oil, gas, petrochemical, onshore and offshore sectors.
Eccentric Reducsers:- An Eccentric reducer, also called a Bell reducer, has two female(inside) threads of different sizes with centers so designed that when they are joined, the two pieces of pipe are not in line with each other,but they can be installed so as to provide optimum drainage of the line.
- Eccentric reducer must be installed with straight side up to prevent trapping air at the pump suction.
- They are designed to allows simple connection of different sized pipes.
- These can be used as pipe reducers flexible connectors and vibration eliminators.
- Eccentric reducers eliminates noise and isolate vibration in the pipeline, reduces stress, eliminates electrolysis and protects against start-up surges.
- They are fabricated using different materials like: Rubber, Silicone,Viton, Alloys, Buna-Nm EPDM, PTFE.
Add to Enquiry Basket | 
|
|
Products
Showcase
View all our products / services as a slide show.
Play Now
|
